X-Rite COLOREYE XTH Скачать руководство пользователя страница 17

Страница: 17 / 64

1-13

INSTALLATION

The Charger has two cables: the Power Cable and the Battery Connection Cable. A third

cable, the Interim Cable, needs to be connected to the Charger and the Instrument. To

perform these connections, proceed as follows:

Figure 1-12. Charger/Interim Cable/Instrument Connection

Note:

The label on the cables should correspond to the labels on the
instrument housing.

1. Locate the Charger, the Interim Cable, and the Instrument in the Carrying Case.
2. Connect the Charger to the Interim Cable at the Charger Connector.
3. Connect the Interim Cable to the Instrument at the three-prong male connector at

the side of the instrument.

4. Connect the Charger Power Cable at the Power Plug to a power outlet.

RS-232 Communication Cable Connection

This cable enables you to transfer saved data from the instrument to your computer. After the

data is saved on the computer, the cable is used to transfer the new data back to the

instrument. The cable is equipped with male to female 4-pin connectors. See Figure 1-13. for

proper connection at the side of the instrument. The remaining end of the cable connects to a

computer communications port. If you are using the optional printer accessory, you may not

use the communication cable and the printer at the same time. The printer cable and the

communication cable use the same port on the instrument. This will not present any difficulty

for you since you will not be printing and downloading data at the same time.

Note:

The label on the cables should correspond to the labels on the
instrument housing.

Figure 1-13. Instrument/ RS-232 Communications Cable/ PC Connection

Charger

Power

Battery Connection Cable

Interim Cable

Charger

Instrument

Connector

Cable

Connector

Charger
Connection

Instrument

4-Pin Instrument

Computer

Computer Port Connector

Instrument

Connector

Communications Port (PC)

RS-232 Communications

Cable

RS-232 Cable

Connection

Содержание COLOREYE XTH

































































Результаты поиска

Содержание COLOREYE XTH

Отзывы:

Похожие инструкции для COLOREYE XTH

Бренды по названию

Популярные бренды

X-Rite COLOREYE XTH, Руководство по эксплуатации

Результаты поиска

Содержание COLOREYE XTH

Отзывы:

Похожие инструкции для COLOREYE XTH

Бренды по названию

Популярные бренды