X-Rite COLOREYE XTH, Руководство по эксплуатации

Страница: 6 / 64

INSTALLATION
1-2
Important Safeguards
In addition to the careful attention that we have devoted to quality standards in the
manufacture of your instrument, your personal safety is a major factor in the design of
each instrument we make. Safety is your responsibility too. This section lists the most
important hazards, warnings, cautions, and notes that will help you protect your
instrument and yourself for many years of trouble-free operation. Please read it carefully
before you operate your instrument.
a. Please Read and Follow Instructions—Read and follow all safety and
operating instructions before you attempt to install and operate this
instrument.
b. Retain This Manual for Future Reference—Once you have read this
manual, keep it handy for others to read or refer to when they need to
operate the instrument.
c. Obey Warnings—Please comply with all warnings and safeguards that we
provide in this manual. They have been written to keep you and your
instrument safe.
d. Choose Proper Power Sources—This product should only operate with the
power specified in the Electrical Requirements section of this manual.
e. Do Not Overload Circuits—Do not overload wall outlets or use extension
cords with this instrument. This can result in a risk of fire or electric shock.
Overloaded AC outlets and extension cords are dangerous, and can also
affect performance. Periodically examine cords to make certain that they
are not damaged, cracked or severely twisted during operation. Cords that
show any signs of damage or wear should be replaced immediately.
f. This device is not explosion-proof and should not be used in a hazardous
atmosphere with exposure to flammable substances.
g. Protect from Water and Moisture—Maintain electrical safety when you use
this instrument. Do not use it in an area where there is possible hazard of
electric shock from spilled water or other liquids or uncontrolled moisture.
h. Clean Properly—Make certain to unplug the spectrophotometer before you
attempt to clean it. Do not use liquid cleaners or aerosol cleaners on your
instrument. Such cleaners may not be compatible with the painted
surfaces, and may actually damage the optics. Use only a slightly damp,
lint-free cloth to clean the surface of the instrument. Do not attempt to
clean the inside of the viewport or the inside of the instrument itself.
i. Do Not Force Objects into the Product—Never push objects of any kind
into the interior of the instrument in an attempt to mop up spilled liquids
that may have entered these areas. If spills should occur that enter the
instrument, turn it off immediately and disconnect all power sources. You
should contact a Service Representative to determine the best way to
handle clean up, drying, and return to the factory for damage assessment.
j. Use the Battery Properly—The rechargeable battery contains Nickel
Metal-Hydride Cells. Do not incinerate, short circuit, or puncture. Use only
the X-Rite approved charger. The Battery may generate
explosive hydrogen gas; do not expose to flame or source of ignition. Do
not use the battery inside a gas-tight package. Keep out of reach of
children. There is a possibility of personal injury if it is misused.