X-Rite COLOREYE XTH Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 64

background image

3-3

OPERATION

7. Repeat step 6 for all the standards or trials you wish to delete. There should be

an asterisk (*) next to each item to delete.

8. Delete the data by scrolling the cursor to the

[del]

at the bottom of the screen.

When the

[del]

(lowercase) changes to

[DEL]

(uppercase), press

Enter

. The

data is deleted.

Recent Recalls

The

Recall Data option

allows you to recall a trial or standard to use in the current

display. You can quickly perform the recall again by using the option Recent Recalls. This

option provides a list of data recalled using the Recall data option. You can quickly find an

item in the list and recall it once again to the active display:

1. Select

DATA

from the ColorEye XTH

Main Menu

.

2. Select RECENT

RECALL

S from the

Data

Menu.

3. The list of recently recalled data appears.
4. Use the left (scroll up) or right (scroll down) arrow keys to move the cursor to the

desired data to recall. The text changes from lower case to UPPER CASE,

signifying your selection.

5. When the cursor is at the data to delete, press

Enter. The data is recalled to

the display.

Using the Printer

The optional printer is used to print the display. You can print the display on demand (refer

to “Using the Print Function” on page 3-4) or setup the Auto Print option to print the display

any time you measure a standard, trial or both a standard and trial (“Auto Print” on page 2-

8).

To setup the printer, proceed as follows:

1. Locate the printer shipping box.
2. Unpack the AC Power Adapter, printer, and printer interface cable. Retrieve

your instrument.

3. Insert the AC Power Adapter Power Plug into an appropriate electrical outlet.
4. Insert the three-pin connector on the AC Power Adapter into the Connection on

the printer.

5. Turn on the printer at the On switch located on the front of the unit.
6. Insert the RJ-11 connector (telephone jack-type connector) on the Printer

Interface Cable into the connection on the printer.

7. Insert the four-pin connector on the Printer Interface Cable into the four-pin

connection on the instrument.

Figure 3-2. Printer AC Power Adapter/Printer/Interface Cable/Instrument Connection

8. You are ready to begin using the printer.

Instrument

RS-232

Connection
(4-pin)

On/Off

Printer

Printer Interface Cable

RJ-11 connector
(telephone jack-type)

4-pin

Connector

AC Power
Adapter Plug

3-pin

Connector

Printer

AC Power Adapter

«
...
41
42
43
44
45
...
»

Содержание COLOREYE XTH

































































Отзывы:

Нет отзывов

Похожие инструкции для COLOREYE XTH

Бренд: Yamaha Страницы: 2

Бренд: HANYOUNG NUX Страницы: 4

Бренд: jenway Страницы: 30

Бренд: National Meter & Automation Страницы: 24

Бренд: Lakeshore Страницы: 2

Бренд: Kamstrup Страницы: 4

Бренд: M-system Страницы: 13

Бренд: Sanmenxia Страницы: 17

Бренд: SANKO Страницы: 25

Бренд: Samson Страницы: 2

BLITZFIRE Series

Бренд: Task Force Tips Страницы: 20

HF Scientific AccUView LED Ex

Бренд: Watts Страницы: 2

Бренд: YOSensi Страницы: 27

CoolPoint CP12-V8

Бренд: UFM Страницы: 14

Nitro-Save NS16

Бренд: TDI Страницы: 4

Бренд: SellEton Scales Страницы: 30

Бренд: Fora Страницы: 64

FrameSaver SLV Series

Бренд: Paradyne Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды