X-Rite COLOREYE XTH, Руководство по эксплуатации

Страница: 11 / 64

1-7
INSTALLATION
4. Connect the Charger Power Cable at the Power Plug to a power outlet. The Red
LED will illuminate. When the charge is complete, the Green LED will illuminate.
5. Disconnect the battery from the Charger at the Charger Connector.
6. Disconnect the Charger power plug from the power receptacle.
Operating the Keypad
The CE XTH keypad is simple to use, with just six, closely-grouped keys commanding all
operation. The instrument is very lightweight and should be easily held with just one hand.
The wrist strap can be moved to either side of the instrument to allow for left or right handed
use. Insert your hand into the wrist strap and place your palm on the back of the instrument.
Adjust the wrist strap to allow the thumb to comfortably reach the Trial and Standard keys.
The instrument and keypad is shown below:
Below is a list of the keys and their function:
Enter :
The Enter key is used for making selections on any display.
Escape (ESC):
The ESC key is used to return to the previous display without saving any data or changing
any settings.
Standard :
The Std key is used to take standard measurements.
Trial :
The Trial key is used to take trial measurements.
Right Arrow (>):
The Right Arrow key is used to move to the right, from one selection to the next. You may be
moving a cursor, an arrow, or to an item whose text changed from lower to upper case
(CAPS) to indicate a selection.
Left Arrow : (<):
The Left Arrow key is used to move to the left, from one selection to the next. You may be
moving a cursor, an arrow or to an item whose text changed from lower to upper case
(CAPS) to indicate a selection.
Left Arrow
Escape
Measure Trial
Measure
Standard
Enter
Right Arrow
Display
Std
Trial