X-Rite COLOREYE XTH, Руководство по эксплуатации

Страница: 28 / 64

SETUP
2-8
Trial Avg. : 1 through 9 .
You can set up your instrument to average measurements to achieve a trial. You must
indicate the number of trial measurements to average.
Calib(ration) Average: 1 through 5
You can set up your instrument to take a specific number of measurements during
calibration to achieve an optimum calibration measurement. The default number of
measurements to take is 3.
Auto Print
You can choose to have the trial or standard information printed automatically each
time a measurement is taken. This option is different than the Print Report option, which
prints a standard ColorEye XTH report. Possible values are:
• Standard -This option automatically prints the display each time a standard is
measured.
• Trial -This option automatically prints the display each time a trial is measured.
• Both -This option automatically prints the display each time either a standard or
trial is measured.
• Off -This option indicates no auto print should be made. This is the option if none
of the above options are chosen.
MI 2nd ILLUM: If the chosen Index is Metamerism, you need to enter the illuminant for
the metamerism. Possible values come from the Illuminant List.
For more information, refer to “Indices” on page 2-2 and “Choosing the Illuminants” on
page 2-5.
Auto Standard
Choose ON to have a standard automatically calculated whenever a trial is measured.
The 5 closest standards in the database appear from which to choose.
Auto Naming
You can choose to have the trials named based on an automatic prefix whenever the
trial is saved. For more information on saving, refer to “Saving Data” on page 3-1.
Possible values are:
• Pre+ - The Optiview trial pre fix will appear on the name entry screen. (The prefix
is entered in the driver software). You may keep the prefix text and add additional
descriptive text. For example, QCE-Blue. QCE is the prefix and you added BLUE
to indicate that the sample is the BLUE trial from the Q uality C ontrol E vening
shift.
• Pre#- The Optiview trial pre fix and the next incremental number ( # ) is used as
the name. The name entry screen does not appear for name editing. For
example, QCE-16 might indicate that the sample is the 16 th taken from the
Q uality C ontrol E vening shift.
• OFF - The name entry screen appears for you to enter the complete name.
• Std# - The standard name and the next incremental number is used as the trial
name. The name entry screen does not appear for name editing. For example,
BLUE-12 might indicate the data is the 12th sample measured associated with
the BLUE standard.
• Std+ - The standard name appears on the name entry screen for editing. You may
keep the standard name and add additional text. For example, BLUE-091298
Illuminants
A CWF SPLHOR D50 TL83
C DLF SPLD65 D55 TL84
U30 NBF SPLD75 D65 TL85
D75