X-Rite COLOREYE XTH, Руководство по эксплуатации

Страница: 29 / 64

2-9
SETUP
might indicate that it is the BLUE standard measured on September 12, 1998
(091298).
Auto Saving
The ColorEye XTH allows you to automatically save the current measurement values
each time a standard and/or trial is measured. Possible values are:
• Standard -This option automatically saves the new standard measurement data.
• Trial -This option automatically saves the new trial measurement data.
• Both -This option automatically saves both the new trial and standard
measurement data.
• OFF -This option indicates no auto save should be made. This is the option if
none of the above options are chosen. You must use the Data Menu, Saving
options to save data. For more information on the Data Menu, refer to “Using the
Data Menu” on page 3-1.
Associations : No or Yes. You should choose Yes if you want to associate trials with a
standard when data is uploaded to the PC.
Tolerances: STD (Standard), and SYS (System). If you wish to use the tolerances of
the current standard, choose STD . If you wish to use the system (instrument)
tolerances regardless of those of the current standard, choose SYS . For more
information on the System tolerances, refer to “Setting Up the Tolerances” on page 2-6.
Note: If you want the block sizes to be updated any time changes are made
to tolerances, you must choose STD.
Setting the Date and Time
In addition to colorimetric data, each measurement contains time and date information.
Choose a format to display the measurement date and to set the correct date and time.
1. Select OPTIONS from the ColorEye XTH Main Menu .
2. Select SETTINGS from the Options Menu .
3. Select SET DATE & TIME from the Settings Menu .
4. The Date and Time Screen is shown below:
5. Choose a date format. The current date format is shown at the bottom of the
display. There are two possible date formats:
mm/dd/yyyy (month listed first with two characters for month and day and four
characters for year)
dd/mm/yyyy (day listed first with two characters for day and month, and four
characters for year).
To change the date format:
a. Move the cursor to the date format at the bottom of the screen using the
left or right arrow keys.
b. Press Enter to toggle between mm/dd/yyyy and dd/mm/yyyy.
SET DATE AND TIME
mm dd yyyy
01/ 00/ 1999
^
hh mm
16: 01
date format mm/dd/yyyy
[save]