X-Rite COLOREYE XTH, Руководство по эксплуатации

Страница: 26 / 64

SETUP
2-6
5. Choose an indicator for the chosen Color Equation. Choose from the following:
Setting Up the Tolerances
You can set up the tolerance values for the color equation you chose in “Choosing the
Color Equation”. To set up the tolerance values for this equation, proceed as follows:
1. Select OPTIONS from the ColorEye XTH Main Menu .
2. Select COLOR SETUP from the Options Menu .
3. Select TOLERANCES from the Color Setup Menu .
4. The Tolerance Entry Screen is shown below:
Figure 2-7. Tolerance Entry Screen
The Tolerance Entry Screen contains values for tolerances for each of the
components of the color equation. For example, Figure 2-7 contains components
for the color equation LCH.
5. To move the cursor, use the left and right arrow keys on the keypad. To increase
the number at the cursor, press the Enter key. Scroll through values 0 through 9.
Note: The values in the left column are considered the negative values and
the values in the right column are considered the positive values.
There is no need to enter positive or negative signs.
The positive tolerance values are used as 555 Shade Sorting block
sizes if the Tolerance setting is STD. For more information, refer to
Tolerances in “Choosing System Setup Options” on page 2-7.
6. Repeat step 5 for all the component values that need to be changed.
7. Save the new tolerance values by scrolling the cursor to the
[save] at the bottom of
the screen. When the [save] (lowercase) changes to [SAVE] (uppercase), press
Enter .
8. The Tolerance values are saved.
Whiteness
CIE Ganz
1982
Berger 1959
Stensby
Taube
Hunter
Berger 1976
E313
Yellowness
ASTM
D1925
ASTM E313
Strength
Chromatic
Apparent
Integrated
Miscellaneous
Metamerism
Brightness
Gloss 60
Tolerances: STD
L* 1 . 0 1 . 0
^
C* 1. 0 1. 0
h* 1. 0 1. 0
DE 1. 0
[save]
Cursor
Equation
Component
Lower
Limit Upper
Limit
}
}
-
+