SETUP
2-14
3. Select
GO TO SLEEP
from the
Diagnostics Menu
.
4. The Display goes blank. The instrument is in Sleep Mode.
For more information about sleep mode, refer to “Sleep Mode” on page 1-12. For more
information about removing the battery, refer to “Removing the Battery” on page 4-3.
Using the Driver Software
If you are using your instrument in an environment where your color settings will
frequently
change (for example, you need to switch color equations or change tolerances), you should
use the Setup Options on the instrument. Begin with “Choosing a Display Mode” on page 2-1.
However, if your color settings will
rarely
change, you should use the Instrument Driver
Software to select your options once, and then return to the software if needed at a later time.
Refer to “Using the Driver Software” on page 2-14.
If you have decided to forgo using the instrument to make your color settings and will use the
software to do so, you need to first decide which of the following ColorEye XTH user profiles
fits your situation:
1. You are using Optiview Color Quality Control Software or
ProPalette Formulation Software.
You will use the diskette included in your shipment titled “ColorEye XTH 2.X Driver
Disk”. Proceed to “Using the Driver Disk Software” on page 2-14.
2. You are using a third-party software (software not sold by
X-Rite
) or no
PC software at all.
You will use the diskette included in your shipment titled “ColorEye XTH Monitor
Disk”. Proceed to “Using the Monitor Disk” on page 2-14.
Note:
You should also make sure that you have your instrument connected
to your PC. For more information on this connection, refer to “RS-232
Communication Cable Connection” on page 1-13.
Using the Driver Disk Software
If you are using Optiview or ProPalette software, you will use the diskette
included in your shipment title “ColorEye XTH 2.X Driver Disk.” The instructions printed on
the disk are repeated here.
Setup Instructions: (Windows 95)
1. Insert Disk into A: drive.
2. Click
Start
on the Task Bar.
3. Click
Run
on the Start Menu.
4. Type
A:\setup.exe
and press enter.
The Driver Installation program is executed. When the installation is finished, the following
Driver Dialog Box appears, shown below.
Using the Monitor Disk
If you are using a third-party software or no PC software at all, you will use the diskette
included in your shipment title “ColorEye XTH Monitor Disk.” The instructions printed on the
disk are repeated here.
Setup Instructions: (Windows 95)
1. Insert Disk into A: drive.
2. Click
Start
on the Task Bar.
3. Click
Run
on the Start Menu.
4. Type
A:\setup.exe
and press enter.
The Driver Installation program is executed. When the installation is finished, the Dialog Box
shown in Figure 2-8 appears.
Содержание COLOREYE XTH
