X-Rite COLOREYE XTH Скачать руководство пользователя страница 8

Страница: 8 / 64

INSTALLATION

1-4

Activating the Display

Your instrument is shipped with the battery installed. The instrument should remain in “Sleep

Mode” throughout the shipment. After the contents of the carrying case are unpacked, you

should “Wake Up” the instrument. Simply press the Enter key and the Start Up Display should

appear after a few seconds. In the event the instrument was in “Active Mode” throughout the

shipment, the battery may be depleted. In this case, you need to charge the battery

immediately before beginning normal operation. Follow the instructions listed in “Charging

the Battery” on page 1-5.

Optimizing Battery Performance

The advanced power management of the ColorEye XTH operates differently from

conventional systems. NiMH batteries tend to discharge more rapidly from the initial fully

charged condition. The discharge rate then slows dramatically, providing more

measurements from 60% capacity down to zero capacity. The net effect is more overall

measurements and extended battery life than conventional batteries. This power

management system is designed to optimize battery life. In fact, even when the battery

gauge displays less than 10% capacity, there is ample power for more than 100

measurements. To help prolong battery life and reduce memory effects we suggest

periodically running the batteries to full discharge -- the point at which the "Low Battery

Alarm" condition is reached.

Although you may have fully discharged the batteries, you can continue to use the ColorEye

XTH without having to remove the batteries. Simply insert the power supply/charger cable

into the ColorEye XTH power connector and charging begins. You can continue to use the

ColorEye XTH while the batteries are charging. For more information, refer to “Charging a

Battery Installed In the Instrument” on page 1-5.

You should always charge the battery while

it is installed in the instrument. If you remove the battery, any stored measurement data in the

instrument will be lost.

Battery Safeguards and Recommendations

This section lists the most important cautions and notes that will help you protect your battery

and yourself during instrument operation, battery replacement and battery charging. Please

read it carefully.

a. Do not charge the battery packs with a battery charger not specified or

approved by

X-Rite

b. You should always charge the battery while it is still installed in the

instrument. If you remove the battery, any stored measurement data on the

instrument will be lost.

c. Do not burn the battery pack.
d. Do not short circuit the terminals.
e. Do not damage or drop the instrument or subject it to mechanical vibration.
f.

Charging temperature range is 50

to 95

F (10

to 35

C). The lower the

temperature, the longer the recharging time.

g. The battery pack is normally warm after charging or use.
h. Store battery packs in a cool dry place. Long exposure to high

temperatures increases battery discharge and reduces battery life.

Total battery discharge may naturally occur during long storage. Discharge

batteries before storing them to extend battery life.

Содержание COLOREYE XTH

































































Результаты поиска

Содержание COLOREYE XTH

Отзывы:

Похожие инструкции для COLOREYE XTH

Бренды по названию

Популярные бренды

X-Rite COLOREYE XTH, Руководство по эксплуатации

Результаты поиска

Содержание COLOREYE XTH

Отзывы:

Похожие инструкции для COLOREYE XTH

Бренды по названию

Популярные бренды