background image

SE

R

IA

L N

o

PRESS HERE TO

LOG ON

3.5 - 4.5V DC

0.2 - 300mA

1W Max

SE

R

IA

L N

o

PRESS HERE TO

LOG ON

3.5 - 4.5V DC

0.2 - 300mA

1W Max

Wireless RIM Base

EN54-25: 2008

Technical Data refer to Installation guide

Part No: ZR401-RL

0359-CPR-00424

Ziton Wireless Remote Indicator Installation Guide

General

The Ziton wireless remote indicator and ancillary 

equipment are available under the following part 

numbers:

PART NO   

VARIANT TYPE

ZR4-RL 

 

Ziton wireless remote indicator  

 

 

c/w wireless base

ZR401-RL   

Ziton wireless remote indicator  

 

 

base (no remote indicator)

ZX4-RL 

 

Ziton wireless remote indicator  

 

 

(no wireless base)

  

The address of the unit is set when programming the 

device to the system (see programming manual for 

details). The installation must conform to BS5839: Part 1 

(or applicable local codes).  

Installation of Ziton wireless remote indicator

Ensure that all detectors are sited in accordance with the 

survey and design details. 

First disengage the remote indicator from the wireless 

module by turning it counter clockwise. This exposes the 

user features in the wireless module, see Figure 2.

Disengage the mounting plate by pressing down the 

locking pin, see Figure 2, and turn the wireless module 

counter clockwise whilst pressing it against the 

mounting plate.

This dis-assembles the mounting plate from the wireless 

module and remote indicator sections, see Figure 1. The 

mounting plate is now free to be fixed to the wall or 

ceiling. 

To guarantee correct operation, connect the power 

jumper across the PIN header on the wireless module 

located under the remote indicator, see Figure 2.

©2018 EMS Ltd. All rights reserved

1 / 4

4 / 4

TSD170  Iss 4  17/10/2018  AJM 

©2018 EMS Ltd. All rights reserved

Figure 1

Ident

Locking mechanism

Power jumper

Figure 2

Notes

TSD170  Iss 4  17/10/2018  AJM 

Mounting Plate

Wireless Module
Remote Indicator

Fix Mounting Plate

Fix the mounting plate using suitable fixings and 

fasteners. All four mounting holes must be used, see 

Figure 3 for highlighted mounting holes.

              When wall mounting, to ensure the text  

 

              description of the head is shown correctly, the 

mounting plate should be installed in the orientation 

shown in Figure 3.

It is important that fastener heads are flush or sub-flush 

with the internal surface of the ceiling mount to avoid 

the risk of damaging the battery PCB.

!

Отзывы: