Wood-mizer LT15WB D17, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 52 / 88

Setup & Operation
Transporting the Sawmill
2
2-19 doc071918 Setup & Operation
7. As they lift the frame, the third person should back the truck slowly under the sawmill until the end of
the frame is resting firmly on the bed of the truck.
IMPORTANT! The operator side is heavier than the opposite side.
8. Position two people on either side of the saw head to hold the sawhead while a third person pulls and
rotates (releases) the lock pin from the locked position to the operation position.
9. Push the saw carriage up the bed frame to the opposite side of the bed frame (on the truck).
NOTE: More people may be required to help push as the saw head gets more dif-
ficult to push up the incline.
10. Engage the lock pin at the end of the sawmill to secure the carriage.
CAUTION! Be sure the lock pin engages the hole in the bed frame to secure the
saw carriage in place. The other lock pin remains in the operation position.
11. Use three or more people to lift the end of the mill still on the ground and slide the sawmill into the
truck bed.
12. Secure the sawmill to the truck bed to prevent the sawmill from shifting while it is being transported.
If the sawmill extends beyond the truck bed, attach a red warning flag to the end of the sawmill.