Wood-mizer LT15WB D17, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 43 / 88

Setup & Operation
Feed Operation
Setup & Operation doc071918 2-10
2
See Figure 2-6.
2.9 Feed Operation
1. Use the feed crank handle to move the saw carriage forward.
See Figure 2-3. Squeeze the engagement lever and rotate the feed crank clockwise.
HINT: To get a straight cut in the first part of the board, feed the blade into the log at a slow speed.
This stops the blade from flexing and dipping up or down. Use a slow speed until the whole width of
the blade has entered the cut. Then increase the feed rate as desired. Maximum feed rate varies
FIG. 2-1
FIG. 2-3
150210-4B
Pull lever to move
blade guide arm in;
Push lever to move
blade guide arm out
Pull lever to move
blade guide arm in;
Push lever to move
blade guide out
150125-19C
Turn crank clockwise for
forward feed;
counterclockwise
to return carriage
Engagement Lever