Wood-mizer LT15WB D17, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 38 / 88

Setup & Operation
Starting The Motor
2
2-5 doc071918 Setup & Operation
secured/closed before operating the sawmill. Failure to do so may
result in serious injury.
IMPORTANT! After aligning the blade on the wheels, always double-check the blade guide spacing
and location. (See
6.1
for more information.)
2.5 Starting The Motor
See the appropriate manual supplied with your specific motor configuration for starting and operating
instructions.
IMPORTANT! When starting the machine for the first time, check that
main motor rotation direction is as indicated by the arrow located on
the motor body (fan guard). If the rotation direction is incorrect, invert
the phases in the phase inverter located in the power socket (electric
box). Setting the phases in the phase inverter correctly will ensure
correct rotation directions of all sawmill motors.
DANGER! Make sure all guards and covers are in place and
secured/closed before operating the sawmill. Failure to do so may
result in serious injury.
DANGER! Always be sure the blade is disengaged and all persons are
out of the path of the blade before starting the engine or motor. Failure
to do so will result in serious injury.
WARNING! Always wear eye, ear, respiration, safety clothing and foot
protection when operating the sawmill. Failure to do so may result in
serious injury.
2.6 Loading, Turning, And Clamping Logs
To Load Logs
1. Move the cutting head to the front end of the frame.
CAUTION! Before loading a log, be sure the cutting head is moved far
enough forward so the log does not hit it. Failure to do so may result in
machine damage.
2. Adjust the log clamps all the way down and move them toward the loading side of the sawmill frame.
CAUTION! Be sure the log clamps are all the way down before loading
a log onto the bed. Failure to do so may result in machine damage.
3. Raise the side supports on the sawmill bed to prevent the log from falling off the side of the bed.
4. Position the log at the foot of the ramps.
!