Wood-mizer LT15WB D17, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 40 / 88

Setup & Operation
Loading, Turning, And Clamping Logs
2
2-7 doc071918 Setup & Operation
See Figure 2-4.
3. Make sure the side supports are positioned low enough for the blade to pass over them. If they are
not, back the clamps off slightly and push the side supports down until they are positioned below the
height of your last cut on a given side of the log.
To Level A Tapered Log
Use shims or the optional wedge to raise either end of a tapered log, if desired.
Shim one end of the log until the heart of the log measures the same distance from the bed rails at
each end of the log.
FIG. 2-4
sm0379_A