Wood-mizer LT15WB D17, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 48 / 88

Setup & Operation
Water Lube Operation
2
2-15 doc071918 Setup & Operation
To use the quarter scale, look at the blade height indicator.Example: You want to cut 1" (25 mm) (4/4)
random width boards from a log. Position the blade for the first cut. Make a trim cut. Return the
carriage for the second cut. Now, instead of having to measure down 1 1/8" (29 mm) on the inch
scale, you can simply lower the blade so the indicator is aligned with the next 4/4 mark on the quarter
scale. Turn the log 90 degrees and repeat.
2.14 Water Lube Operation
The optional Water Lube System keeps the blade clean. Water flows from a 5-gallon (18.9 liter) bot-
tle through a hose to the blade guide where the blade enters the log. A valve in the bottle cap con-
trols the amount of water flow.
See Figure 2-5. Install the water bottle bracket at the top of the saw head mast. NOTE: The
D17/D19/G25 water tank tray also includes the fuel tank, but mounts to the mast in the same man-
ner.
Standard Quarter Scale Grade Hardwood Quarter Scale
Scale Actual Board Thickness Scale Actual Board Thickness
4/4 1" (25 mm) 4/4 1 1/8" (29 mm)
5/4 1 1/4" (32 mm) 5/4 1 3/8" (35 mm)
6/4 1 1/2" (38 mm) 6/4 1 5/8" (41 mm)
8/4 2" (51 mm) 8/4 2 1/8" (54 mm)
TABLE 2-1
FIG. 2-5
150203-1
Place bottle
assembly in
bracket
Connect hose
to blade guide
tube
Shutoff
Valve
Hose
Clamp
Hose
Clamp
Tie Wrap