25
WIKA operating instructions pneumatic high pressure controller, model CPC7000
0019104001D 10/2018 EN
EN
6.4.1.1
Range Hold/ Autorange
The Range Hold / Autorange button allows the user to select the active range of the transducers. By clicking the Range Hold
button, the user can select the active transducer from the primary, secondary and tertiary transducers or utilize the “Autorange”
feature to let the instrument automatically select the active range based on the current pressure value.
Figure 6.4.1.1 Range Hold Button
6.4.1.2
Control Setpoint
The Setpoint button allows the user to enter the desired pressure value to be controlled by the instrument. There are multiple ways
of entering the control setpoint: numeric keypad, step increments, percentage entry, digital step or a program data entry. These
methods can be accessed by the user by pressing the “Setpoint” button and the various setpoint entry methods can be navigated
with the Next Page [
] and Previous Page [
] buttons.
Figure 6.4.1.2 Setpoint Button
6. Operation
Range Hold button
Setpoint button
