45
WIKA operating instructions pneumatic high pressure controller, model CPC7000
0019104001D 10/2018 EN
EN
6. Operation
6.4.7 Programs Application
The Programs Application is used to create, view and edit programs that are used to automatically run a sequence
of commands within the CPC7000. The Programs App screen displays the contents of the first written program in
read only mode by default (Figure 6.4.7-A). User can load, edit and delete other saved and predefined programs by
clicking on the title of the current program and then selecting the desired program sequence from the sidebar (Figure
6.4.7-B).
Figure 6.4.7-A Programs App
Figure 6.4.7-B Programs Selection
6.4.7.1
Edit Programs
By default the programs are available in read only mode to prevent accidental changes to existing programs. The users can edit
existing programs or create steps in new ones by clicking on Edit Program [
] button (Figure 6.4.7.1-A). This makes the
program editable and also activates the Insert [
] and Delete [
] buttons which are otherwise just labels and can’t be
clicked by the user. A series of predefined commands can be chosen to write the steps of a program. Selection of commands and
data in each sequential line will create a draft of resulting command sequence in the selected program (Figure 6.4.7.1-B). Upon
exiting the edit mode by pressing the Edit Program [
] button, the system will ask “Save changed programs?” Pressing the
[
] button will accept the changes, pressing the [
] will revert back to the old program. A list of available commands, data
values and their functions are listed in Table 6.4.7.1.
Figure 6.4.7.1-A Editable Programs
Figure 6.4.7.1-B New Line Creation
