WIKA CPC7000 Скачать руководство пользователя

Страница: 7 / 93

WIKA operating instructions pneumatic high pressure controller, model CPC7000

0019104001D 10/2018 EN

1. General Information

■

The CPC7000 pneumatic high pressure controller described in the operating instructions has been designed and manufactured

using state-of-the-art technology. All components are subject to stringent quality and environmental criteria during production.

Our management systems are certified to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on handling the instrument. Working safely requires that all safety

instructions and work instructions are observed.

■

Observe the relevant local accident prevention regulations and general safety regulations for the instrument's operating range.

■

The operating instructions are part of the instrument and must be kept in the immediate vicinity of the instrument and readily

accessible to skilled personnel at any time. Pass the operating instructions onto the next operator or owner of the instrument.

■

Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.

■

The general terms and conditions contained in the sales documentation shall apply.

■

Subject to technical modifications.

■

Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with international standards.

■

Further information:

Mensor Corporation

- Internet address:

www.mensor.com

- Relevant data sheet:

CT 27.63

- Application consultant:

Tel.: (+1) 512-396-4200

(+1) 800-984-4200 (USA only)

Fax: (+1) 512-396-1820
E-Mail: [email protected]
[email protected]

WIKA Alexander Wiengand SE & Co. KG

- Internet address:

www.wika.de / www.wika.com

- Relevant data sheet:

CT 27.63

- Application consultant:

Tel.: (+49) 9372/132-5015
E-Mail:

[email protected]

1.1 Warranty

All products manufactured by Mensor are warranted to be free of defects in workmanship and materials for a period of two year

from the date of shipment. No other express warranty is given, and no affirmation of Seller, by words or actions, shall constitute

a warranty. SELLER DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR

PURPOSES WHATSOEVER. If any defect in workmanship or material should develop under conditions of normal use and service

within the warranty period, repairs will be made at no charge to the original purchaser, upon delivery of the product(s) to the

factory, shipping charges prepaid. If inspection by Mensor or its authorized representative reveals that the product was damaged

by accident, alteration, misuse, abuse, faulty installation or other causes beyond the control of Mensor, this warranty does not

apply. The judgment of Mensor will be final as to all matters concerning condition of the product, the cause and nature of a defect,

and the necessity or manner of repair. Service, repairs or disassembly of the product in any manner, performed without specific

1. General information

Содержание CPC7000






























































































Результаты поиска

Содержание CPC7000

Отзывы:

Похожие инструкции для CPC7000

Бренды по названию

Популярные бренды

WIKA CPC7000, Руководство по эксплуатации

Результаты поиска

Содержание CPC7000

Отзывы:

Похожие инструкции для CPC7000

Бренды по названию

Популярные бренды