11
WIKA operating instructions pneumatic high pressure controller, model CPC7000
0019104001D 10/2018 EN
EN
2. Short overview
2.3 Front Panel
The CPC7000 front panel includes an 8.9” color LCD display with touch screen. Operator input is accomplished by pressing the
words or symbols and the App icons presented on the display. There is a single discrete on/off button and a USB on the right hand
side. The front panel is hinged for easy access to remove or replace the transducers inside. The instructions for accessing the
transducers are provided in Section 9.4 Transducer removale. The front panel also shows the model number designation and brand
logos
2.3.1 Power Switch
The power switch is a two-state device with an action similar to that of a ball point pen. Push the button with enough force to latch it
in to turn the unit ON. Push it again to release it to turn the system OFF.
If power to the instrument is interrupted while ON it will shut down until the power is restored, then
immediately resume operation
2.3.2 USB Port
The front panel USB port is the Host USB and is intended for future expansion or software upgrades.
Screws to open
front panel