12
WIKA operating instructions pneumatic high pressure controller, model CPC7000
0019104001D 10/2018EN
EN
2.4 Display
The display is made up of two sections. In the main screen (“Home Application”), the left three fourths shows the operating screen
displaying the active pressure reading, units, mode (absolute or gauge), active range of the internal transducer, pressure control
setpoint, a bar graph (if enabled), an auto zero or tare button (if enabled) and any auxiliary displays that have been chosen. The
right one fourth of the screen has Application Icons (“Apps”) for setting general instrument settings, control settings, display
settings, program settings, favorites plus a “Next Page” button [
] that, when pressed, shows a second and third page of icons
for remote communication, troubleshooting, switch test, leak test, digital I/O and service applications.
Operating Screen
Settings Apps
Active transducer range
Optional Zero or Tare
Current Value
Units and Mode
Auxiliary Displays
Operating Modes
{
Buttons, Labels and Windows:
The CPC7000 touch screen has many buttons with relevant graphic icons or text which, when
touched, will open a related window where changes can be made or information viewed. Some of these buttons will toggle from
one state to another, others present choices or display a numerical data entry screen. Text or icons that are displayed, but do not
respond to being touched, are called labels or windows. Operators will quickly become accustomed to the particular characteristics
of the frequently used buttons.
Main Screen:
The main screen or “Home Application”, appears after power-up. This screen contains the operating screen and
Settings application screen. It will remain as configured after a power cycle.
Operating screen:
The operating screen (left 3/4 of the main screen) contains information relevant
to the measurement. Up to three auxiliary displays can be shown simultaneously along with the current pressure value
2.5 Scope of Delivery
■
Pneumatic high pressure controller model CPC7000
■
Power cord with 1.5 m (5 ft) length
■
Operating instruction
■
Factory calibration certificate
Cross-check scope of delivery with delivery note.
2. Short overview
