Specialized Concentrated Focused
「
68
」
Operation
Parameter
Definition
Setting Range
point
Shape separate
processing_valid
It sets whether the system will completely process
the last shape before machining the next one(s).
True: Valid
False: Invalid
Bottom machining
valid
Valve operation is enabled only when [3D cutting]
is on the workpiece surface.
True: Valid
False: Invalid
Use dxf file as metric
size
It forcibly sets dxf file as metric size.
True: Forcibly set as
metric size
False: Not forcibly set
as metric size
Translation parameters of DXF file are applied to translation for DXF files, including “Tool lifting
height
”, “Machining depth”, “Layer depth”, “Use first point as zero point” and “Shape separate
processing _valid
”, etc.
When processing Dxf files, the system treats the action of tool lifting as the separate mark for the
adjacent shapes. If there is no tool lifting, the system will consider only one shape is being
processed. If tool lifting occurs, it indicates the processing of a complete shape is finished. For
example, process several circles adjacent to each other. The depth of each circle is 10mm, and
each feed depth of Z axis is 2mm. If parameter N1092 is set as true, machine tool will process the
current circle 5 times, then uplift the tool, and then go to process the next circle. If it is set as false,
machine tool will process the current circle once, then lift its tool, and then go to process the other
circles. After all the circles are processed once, this process will be re-executed 4 times to finish
processing all the shapes.
Related parameter (ENG File)
Parameter
Definition
Setting Range
Select tool for ENG
Need to reload the file
True: Valid
False: Invalid
Select tool for ENG
Need to reload the file. Take effect only in ENG 5.50 or
5.53
True: Valid
False: Invalid
Tool change prompt
If it is set as true, when tool change command is
encountered, machine tool will suspend processing and
uplift its Z axis, and prompt bar in the system will prompt
tool change. At this time, users can perform the
operation of tool change. If it is set as false, when tool
change command is encountered, machine tool will not
suspend processing, but the prompt bar in the system
will still prompt tool change.
False: Invalid
True: Valid
Tool lifting height
Tool lifting height in rapid traverse
0~100000 mm
Retract amount
The retract amount after each feed when high-speed
reciprocating chip removal is adopted to drill deep
holes.
0~100000 mm
