Specialized Concentrated Focused
「
76
」
Operation
Fig. 3-65 Jiggle
Take positive direction of X axis as an example.
When “X+” button (or number 6) is pressed, X axis will
move a step along its positive direction.
If “X+” is pressed continuously, X axis will keep moving toward
its positive direction until this button is released.
The value of step can be adjusted by the slider in the jiggle dialog.
Note that jiggle operation is only valid for current processing task. If
stop function is used, jiggle result will be invalid after processing
restarts.
3.16.2 Breakpoint Resume
Press F6 [Resume] in [Auto] function section to select this function, and then the system will continue
processing from the last stop line number.
If power failure or emergency stop occurs during processing, and users are sure about the accuracy of
the workpiece coordinates, they can select this function to make the machine tool rapidly move to the
breakpoint for continuing processing, which can save them processing time.
3.16.3 Advanced Start
It is also called selected machining. Under [Auto] function section, press F7 to select this function to
realize block skip.
After F7 is pressed, a dialog will pop up, as shown in Fig. 3-66.
