WEIHONG NK200, Руководство пользователя

Страница: 145 / 153

Specialized Concentrated Focused
Parameter Overview
「
133
」
Name Setting Range Default Effect Time Reference
Max X-axis speed 6~15000 mm/min 15000 After reboot 3.6.3
Max Y-axis speed 6~15000 mm/min 15000 After reboot 3.6.3
Max Z-axis speed Z down speed~15000 mm/min 15000 After reboot 3.6.3
Reference velocity 0.1667~10000 mm/min 500 After reboot 3.6.3
X axis reference
velocity in corner
0.1667~10000 mm/min 500 After reboot 3.6.3
Y axis reference
velocity in corner
0.1667~10000 mm/min 500 After reboot 3.6.3
Z axis reference
velocity in corner
0.1667~10000 mm/min 500 After reboot 3.6.3
Reference circular
speed
Yes: Valid; No: Invalid Yes Immediately 3.6.3
Reference circle
speed
- Immediately 3.6.3
Limit max velocity for
small lines
Yes: Valid; No: Invalid Yes Immediately 3.6.3
Length for limit max
velocity
0.001~100000 mm 2 Immediately 3.6.3
Path smoothing time 0~2 sec 0 Immediately 3.6.3
Arc radius tolerance 0~999 mm 2 Immediately 3.6.3
Enable IJK increment
mode
Yes: Valid; No: Invalid Yes Immediately 3.6.3
Stop spindle while
pausing
Yes: Valid; No: Invalid Yes After reboot 3.5
Stop spindle while
stopping
Yes: Valid; No: Invalid Yes After reboot 3.5
Is open coolant while
starting
Yes: Valid; No: Invalid No After reboot 3.5
Is close coolant while
stopping
Yes: Valid; No: Invalid No After reboot 3.5
Whether to stop
spindle at end
Yes: Stop; No: Not stop Yes Immediately 3.5
Max. spindle speed 10000~999999 r/min 24000 After reboot 3.5
Spindle start/ stop
time
0~60000 ms 5000 Immediately 3.5
Center spindle rev 0~ Max. spindle speed r/min 500 Immediately 3.5