Specialized Concentrated Focused
Preface
「
I
」
Preface
About This manual
This manual is intended for manufacturers. If you use Weihong CNC system for the first time, it is
suggested to read through this manual. If not, however, you can search for the desired information via
the contents.
With 7 chapters, this manual can be divided into 5 parts, as follows:
1) Preface, introducing the precautions about transportation and storage, installation, wiring,
debugging, usage and so on. You need to read them first carefully to ensure safe operations.
2) Hardware part, including chapter 1, 2 and 5. The first two introduce the product configuration,
hardware information and ports specification of NK200 while chapter 5 lists driver parameter
settings and wiring sketches of each brand.
3) Software part, including chapter 3. It illustrates detailed operations of single functionality and its
corresponding interfaces, which will be an intuitional guidance to users and operators in real
practice.
4) Maintenance part, including chapter 4. By reading the common troubleshooting, you can react to the
target and take corresponding steps in case of problems.
5) Appendix part: last part of this manual, consisting of chapter 6 and chapter 7, listing parameter
overview and the software license agreement respectively.
Applicable Product Model
This manual is applicable to NK200 integrated system. Refer to the table below for details.
Product Model
Remarks
NK200 Integrated
CNC system
Herein referred to NK200 as abbreviation, supporting three-axis standard
configuration and turn table configuration. In general,
“the system” stands for
NK200 integrated CNC system without special notice.
Contact Us
You can contact us by the following info for technical support and pre-sales / after-sales service:
Company Name:
Weihong Electronic Technology Co., Ltd.
Headquarters Address:
No.1590, Huhang Rd., Fengxian, Shanghai, PRC 201400
Tel:
+86-21-33587550
Fax:
+86-21-33587519
Website:
