WEIHONG NK200, Руководство пользователя

Страница: 143 / 153

Specialized Concentrated Focused
Parameter Overview
「
131
」
6 Parameter Overview
Since the parameter number in NK200 is not fixed and varies with the software upgrade or system
update, it is recommended to locate the needed parameters by its name.
Name Setting Range Default Effect Time Reference
3. Operation parameter
Manual high speed
Manual low speed~ max speed of
each axis mm/min
3500 Immediately 3.6.1
Manual low speed 0~Manual high speed mm/min 1500 Immediately 3.6.1
Dry running speed
Defalut feeding speed~ max speed
of each axis
3500 Immediately 3.6.2
Machining speed 0.001~Dry running speed 3000 Immediately 3.6.2
Safe height 0~500 mm 10 Immediately 3.6.3
Single axis acc
0.001~100000 mm/s
2
800 Immediately 3.6.3
The delay time of cute
angle motion
- 0 Immediately 3.6.3
Startup speed 0~ 0 Immediately 3.6.3
Max machining speed
Machining speed~max speed of
each axis mm/min
10000 Immediately 3.6.3
Rough speed of cali 1~ manual high speed mm/min 400 Immediately 3.7
Cali block thickness 0~100 mm 10 Immediately 3.7
X mechanical coor of
fixed cali
X/Y/z workbench lower limit~X/Y/Z
workbench upper limit
0 Immediately 3.7
Y mechanical coor of
fixed cali
0 Immediately 3.7
Z mechanical coor of
fixed cali
-1 Immediately 3.7
Handwheel output
direction
1:handwheel output direction same
with feeding direction
-1:hanwheel output direction
opposite to feeding direction
1 After reboot 3.14
Handwheel in strict
accordance with the
pulse-counting
exercise
Yes: Valid;
No: Invalid
No After reboot 3.14