Wacker Neuson Dumper 5001, Руководство оператора

Страница: 46 / 130

3-14
BA 5001-6001 US – Edition 1.2 * 6001b330.fm
Operation
3.5 Driving the dumper
Preheating start switch: overview
Before starting the engine
☞
Adjust your seat position – see Seat adjustment on page 3-24
Important
All controls must be within easy reach. You must be able to press the
accelerator and brake pedals to their limit positions!
☞
Fasten your seat belt – see Seat belt on page 3-25
• Do not fasten your seat belt if the rollbar is not raised.
☞
Check whether all levers and pedals are in neutral position.
☞
Press the accelerator pedal to the center position (between minimum and maximum) if
the engine is cold.
Starting the engine: general
• The starter cannot be actuated if:
• the engine is already running (start repeat interlock).
• the drive lever is not in neutral position,
• the parking brake is not applied.
• Do not run the starter for more than 10 seconds
• Wait about 1 minute so the battery can recover before trying again
1
0
2
3
Fig. 26: Preheating start switch
G
Position Function
Power consumer
0
Insert or remove the starter key None
1
ON/drive position
All functions are operational
➥
indicators come on
2
Preheats the engine (10 – 15
seconds)
➥
Until the preheating indicator goes
out
3
Starts the engine
➥
Starter is actuated
➥
Indicators must go out
Operation