Wacker Neuson Dumper 5001 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 130

background image

BA 5001-6001 US – Edition 1.2 * 6001b210.fm

2-9

Safety Information

• If maintenance with the engine running cannot be avoided, lower the dump bucket and

apply the parking brake.

• Wear a safety harness when performing elevated maintenance work. Keep all handles,

steps, handrails, platforms, landings and ladders free from dirt, snow and ice.

• Always use specially designed or otherwise safety-oriented ladders and working

platforms to perform overhead assembly work. NEVER use machine parts or
attachments/superstructures as a climbing aid!

• Do not use the work equipment as lifting platforms for persons.
• In accordance with this Operator's Manual and instructions for the respective assembly,

release the pressure in all system sections and pressure lines (hydraulic system)
before performing any maintenance work.

2.10 Special hazards

Battery

• In case of a frozen battery or of an insufficient electrolyte level, do not try starting the

machine with battery jumper cables. The battery can burst or explode.

• Batteries contain caustic sulphuric acid. When handling the battery, observe the

specific safety instructions and regulations relative to accident prevention.

• A volatile oxyhydrogen mixture forms in batteries during normal operation and

especially when charging. Always wear gloves and eye protection when working with
batteries.

• Starting the machine with a battery jumper cable can be dangerous if performed

improperly. Observe the safety instructions regarding the battery.

Tracks (track dumpers)

• Repair work on the tracks must be performed only by trained technical staff or by an

authorized service facility.

• Defective tracks reduce the machine's operational safety. Therefore, check the tracks

regularly for cracks, cuts or other damage.

• Check track tension at regular intervals.

Electric energy

• Use only original fuses with the specified current rating.
• In case of electric system malfunctions, switch off the machine immediately, disconnect

the battery (by using the battery master switch)and perform troubleshooting
procedures.

• When working with the machine, maintain a safe distance from overhead electric lines!

If work must be performed close to overhead lines, the equipment and attachments
must be kept well away from them.

• If the machine comes into contact with a live wire:

• Immediately drive the machine out of the danger area.
• Warn others against approaching and touching the machine.
• Do not leave the machine until the line that has been touched or damaged has been

safely de-energized!

«
...
27
28
29
30
31
...
»

Содержание Dumper 5001



































































































































Отзывы:

Нет отзывов

Похожие инструкции для Dumper 5001

Бренд: MacDon Страницы: 17

Бренд: Olympus Страницы: 50

Бренд: VAHVA Страницы: 19

Бренд: GE Страницы: 242

Бренд: GE Страницы: 24

Бренд: Balanced Body Страницы: 3

Бренд: GE Страницы: 14

Бренд: GE Страницы: 11

Бренд: GE Страницы: 20

Druck ADTS 2 Series

Бренд: GE Страницы: 18

Бренд: Canta Страницы: 2

Бренд: NEC Страницы: 54

Бренд: Tate Страницы: 7

Бренд: Tate Страницы: 5

BioHarmonex BH4

Бренд: Calivita Страницы: 38

Бренд: CAIRE Страницы: 91

Бренд: Parker Страницы: 5

Бренд: Bacharach Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды