VWR MD 8000 L, Руководство по эксплуатации

Страница: 81 / 98

MD 8000 L Transmitting data (USB interface)
ba77218e01 11/2018
81
13.4 Options for data transmission to a PC
Via the USB-B interface you can transmit data to a PC. The following table
shows which data are transmitted to the interface in which way:
13.5 MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measurement data with a PC.
Data Control Operation / description
Current
measured
values of all
connected
sensors Manual  With
<F2>
/ [USB output] .
 Simultaneously with every manual
data storage process (see section 12.1
M
ANUAL DATA STORAGE
, page 74).
automatic, at
intervals  With
<F2__>
/ [USB output] .
Then you can set the transmission
interval.
 Simultaneously with every automatic
data storage process (see section 12.2
A
UTOMATIC DATA STORAGE AT INTER
-
VALS
, page 75).
Stored mea-
sured values Manual  Displayed dataset with
<F2>
[USB out-
put] after calling up from the data stor-
age.
 All datasets with the Output to RS232/
USB function.
(see section 12.3.1 E
DITING THE MEA
-
SURED VALUE DATA STORAGE
, page 77).
Calibration
records Manual  Calibration record with
<F2>
/ [USB
output] (see section 6.2.6 C
ALIBRATION
DATA
, page 35; section 8.2.7 C
ALIBRA
-
TION DATA
, page 47; section 9.3.4 C
AL
-
IBRATION DATA
, page 53).
automatic  At the end of a calibration procedure.
The following rule applies: With the exception of the menus, shortly
pressing the
<F2>
/ [USB output] key generally outputs the display
contents to the interface (displayed measured values, measuring
datasets, calibration records).
More detailed information can be found in the MultiLab Importer
operating manual.