VWR MD 8000 L, Руководство по эксплуатации

Страница: 72 / 98

Settings MD 8000 L
72
ba77218e01 11/2018
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the
<OK>
key.
ORP The following settings for ORP measurements are reset to the default settings
with the
Reset function:
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the
<OK>
key.
Dissolved oxygen The following settings for D.O. measurements are reset to the default settings
with the
Reset function:
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the
<OK>
key.
Conductivity The following settings for conductivity measurements are reset to the default
settings with the
Reset function:
Slope -59.2 mV
Man. temperature 25 °C
Single-point calibration off
Setting Default settings
Setting Default settings
mV resolution 0.1
Man. temperature 25 °C
Setting Default settings
Calibration interval 180 d
Check interval 60 d
Measured parameter D.O. concentration (mg/l)
Relative slope (S
Rel
) 1.00
Salinity (value) 0.0
Salinity (function) off
Number of calibration points 1
Resolution 0.1
Saturation, local off
Setting Default settings
Calibration interval 150 d
Measured parameter ϰ