VWR MD 8000 L, Руководство по эксплуатации

Страница: 74 / 98

Data storage MD 8000 L
74
ba77218e01 11/2018
12 Data storage
You can transmit measured values (datasets) to the data storage:
 Manual data storage (see section 12.1 M
ANUAL DATA STORAGE
, page 74)
 Automatic data storage at intervals (see section 12.2 A
UTOMATIC DATA STOR
-
AGE AT INTERVALS
, page 75)
Each data storage process transmits the current dataset to the USB interface.
12.1 Manual data storage
You can transmit a measurement dataset to the data storage as follows. The
dataset is at the same time output to the interface:
If the memory is full When all storage locations are occupied, it is not possible to continue storing.
Then you can e.g. transmit the stored data to a PC (see section 12.3.1 E
DITING
THE MEASURED VALUE DATA STORAGE
, page 77) and subsequently erase the
data storage (see section 12.3.2 E
RASING THE MEASUREMENT DATA STORAGE
,
page 78).
1. Press the
<STR>
key shortly.
The menu for manual data storage appears.
2. If necessary, change and confirm the ID number (1 ... 10000) with
<

><

>
and
<OK>
.
The dataset is stored. The meter switches to the measured value dis-
play.
01.11.2018 07:43:33
pH 7.000 24.8 °C AR +++
ID number: 1
continue
Manual data storage 4 von 500
01.11.2018
08:00
Back