VWR MD 8000 L, Руководство по эксплуатации

Страница: 14 / 98

Commissioning MD 8000 L
14
ba77218e01 11/2018
4.3.1 Inserting the batteries
4.3.2 Connecting the power pack
You can operate the meter either with normal batteries or with
rechargeable batteries (Ni-MH). In order to charge the batteries, an
external charging device is required.
1. Open the battery compartment (1) on the underside of the meter.
1 Battery compartment
CAUTION
Make sure that the poles of the batteries are positioned cor-
rectly.
The
±
signs on the batteries must correspond to the
±
signs in
the battery compartment.
2. Place four batteries (type Mignon AA) in the battery compartment.
3. Close the battery compartment.
4. Set the date and time
(see section 5.4.5 E
XAMPLE
2
ON NAVIGATION
: S
ETTING THE DATE AND TIME
,
page 24).
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see section
3.2 G
EN
-
ERAL DATA
, page 11).
1