VWR MD 8000 L, Руководство по эксплуатации

Страница: 24 / 98

Operation MD 8000 L
24
ba77218e01 11/2018
5.4.5 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated in
the status line of the measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
 Current date and time
 Calibration date

Identification of stored measured values.
Therefore, check the time at regular intervals.
Setting the date,
time and date format
The date format can be switched from the display of day, month, year
(
dd.mm.yy ) to the display of month, day, year ( mm/dd/yy or mm.dd.yy ).
8. Select the required language with
<

><

>
.
9. Confirm the setting with
<OK>
.
The meter switches to the measuring mode.
The selected language is active.
The date and time are reset to default after a fall of the supply volt-
age (empty batteries).
Language: Deutsch
Audio signal: off
Illumination: on
Contrast: 50 %
Shutoff time: 1 h
Temperature unit: °C
General
01.11.2018
08:00
Back
1. In the measured value display:
Using
<OK
_
>
, open the Storage & config menu.
The instrument is in the setting mode.
2. Select and confirm the System / Clock function menu with
<

><

>
and
<OK>
.
The setting menu for the date and time opens up.