VWR MD 8000 L, Руководство по эксплуатации

Страница: 10 / 98

Overview MD 8000 L
10
ba77218e01 11/2018
 facilitate to assign a sensor to a measured parameter with differently colored
couplings
 have quick-lock couplings with which to fix the sensors to the meter.
Sensor data from
IDP sensors
IDP sensors transmit the following sensor data to the meter:
 SENSOR ID
– Sensor name
– Sensor series number
 Calibration data
 Measurement settings
The calibration data are updated in the IDP sensor after each calibration proce-
dure. A message is displayed while the data are being updated in the sensor.
2.2.2 Automatic sensor recognition
The automatic sensor recognition for IDP sensors allows
 to operate an IDP sensor with different meters without recalibrating
 to assign measurement data to an IDP sensor
– Measurement datasets are always stored and output with the sensor
name and sensor series number.
 to assign calibration data to an IDS sensor
– Calibration data and calibration history are always stored and output with
the sensor name and sensor series number.
 to hide menus automatically that do not concern this sensor
To be able to use the automatic sensor recognition, a meter that supports the
automatic sensor recognition (e.g. MD 8000 L) and a digital IDP sensor are
required.
In digital IDP sensors, sensor data are stored that clearly identify the sensor.
The sensor data are automatically taken over by the meter.
In the measured value display, you can display the sensor name
and series number of the selected sensor with the [
i ] softkey. You
can then display further sensor data stored in the sensor with the
[More] softkey (see section 5.1.5 S
ENSOR INFO
, page 18).