VWR MD 8000 L, Руководство по эксплуатации

Страница: 68 / 98

Settings MD 8000 L
68
ba77218e01 11/2018
11.5 Turb measurement settings
11.5.1 Settings for turbidity sensors
The settings are made in the menu for the measured parameter, turbidity. To
open the settings, display the required measured parameter in the measured
value display and press the
<OK>
key. After completing the settings, switch to
the measured value display with
<M>
.
The possible settings are individually displayed for each sensor. Default set-
tings are printed in
bold .
Setting menu of the
VisoTurb
®
900-P
Temp. comp. (TC) /
Linear coeff.
0.000 ...
2.000 ...
3.000 %/K
Coefficient of the linear tempera-
ture compensation.
This menu item is only available
when the linear temperature
compensation is set.
Temp. comp. (TC) /
Reference temp.
20 °C
25 °C
Reference temperature
This setting is only available for
the measured parameters, con-
ductivity (
ϰ
) and resistivity (
ρ
).
Multiplier for TDS 0.40 ... 1.00 Factor for TDS value
Reset - Resets all sensor settings to the
delivery condition (see section
11.7.1 R
ESETTING THE MEASURE
-
MENT SETTINGS
, page 71).
Menu item Possible
setting Explanation
Menu item Possible
setting Explanation
Calibration /
Calibration record
- Displays the calibration record of the
last calibration.
Calibration /
Calibration data
storage
/ Display
- Displays the last calibration records
(max. 10)
Calibration /
Calibration data
storage
/ Copy to
USB flash drive
- Outputs the stored calibration data
to a connected USB memory device/
USB printer)
Calibration /
Calibration data
storage
/ Output to
RS232/USB
- Outputs the calibration data storage
to the interface