VWR MD 8000 L, Руководство по эксплуатации

Страница: 65 / 98

MD 8000 L Settings
ba77218e01 11/2018
65
tings, switch to the measured value display with
<MODE>
.
Default settings are printed in bold .
Menu item Possible
setting Explanation
Calibration /
Calibration record
- Displays the calibration record of
the last calibration.
Calibration /
Calibration data
storage
/ Display
- Displays the last calibration
records.
Calibration /
Calibration data
storage
/ Output to
RS232/USB
- Outputs the calibration data stor-
age to the interface
Calibration /
Calibration interval
1 ... 180 ...
999 d
Calibration interval for the D.O.
sensor (in days).
The meter reminds you to calibrate
regularly by the flashing sensor
symbol in the measuring screen.
Calibration /
Comparison meas.
on
off
Enables to adjust the measured
value with the aid of a comparison
measurement, e.g. Winkler titra-
tion.
For details, see section 8.2 C
ALI
-
BRATION
, page 43.
Calibration / cap
coefficients
K1
...
K5
KC Enter the cap coefficients here after
exchanging the sensor cap.
For details, see section 11.3.2
E
NTER CAP COEFFICIENTS
, page 66.
Salinity / Sal correc-
tion
on
off
Manual salt content correction for
concentration measurements.
Salinity / Salinity 0.0 ... 70.0 Salinity or salinity equivalent for the
salt content correction.
This menu item is only available if
the manual salinity correction is
switched on.
Resolution 0.1
1
Set a high or low resolution.
The setting of the resolution is sep-
arately stored for each measured
parameter.