VWR MD 8000 L, Руководство по эксплуатации

Страница: 73 / 98

MD 8000 L Settings
ba77218e01 11/2018
73
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the
<OK>
key.
11.7.2 Resetting the system settings
The following system settings can be reset to the default condition:
The resetting of the system settings is done in the menu Storage & config /
System / Reset . To open the menu Storage & config in the measured value
display, press the
<OK
_
>
key.
Cell constant (c) Depending on the connected measur-
ing cell:
0.475 cm
-1
(calibrated)
0.475 cm
-1
(set)
Temperature compensation nLF
Reference temperature 25 °C
Temperature coefficient (TC) of
the linear temperature compensa-
tion 2.000 %/K
TDS multiplier 1.00
Setting Default settings
Language English
Audio signal on
Baud rate 4800 Baud
Output format ASCII
Decimal separator .
Contrast 50
Illumination Auto
Shutoff time 1 h
Temperature unit °C
Stability control on
Setting Default settings