VWR MD 8000 L, Руководство по эксплуатации

Страница: 20 / 98

Operation MD 8000 L
20
ba77218e01 11/2018
5.3 Switching off the meter
5.4 Navigation
5.4.1 Operating modes
5.4.2 Measured value display
In the measured value display, you can
 open the menu for calibration and measurement settings with
<OK>
(short
keystroke)
 open the system menu with the sensor-independent settings by pressing
<OK>
Storage & config for a
<OK
_
>
long keystroke, approx. 2 s).
 change the display in the selected measuring screen (e. g. pH
><−
mV) by
pressing
<MODE>
.
5.4.3 Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
The selection is done with the
<

><

>
keys. The current selection is dis-
played with a frame.
 Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with
<OK>
. Example:
1. Switch the meter off with
<On/Off>
.
Operating
mode Explanation
Measuring The measurement data of the connected sensor are shown
in the measured value display
Calibration The course of a calibration with calibration information, func-
tions and settings is displayed
Storing in
memory The meter stores measuring data automatically or manually
Transmit-
ting data The meter transmits measuring data and calibration records
to a USB-B interface automatically or manually.
Setting The system menu or a sensor menu with submenus, set-
tings and functions is displayed