Vertiv Liebert iCOM DP400/500, Инструкция по установке и эксплуатации

Страница: 109 / 180

11.7 Diagnosing Digital Output Issues
1. Touch , then > Diagnostic/Service > Diagnostics > Digital Outputs in the Category list. The
DIGITAL OUTPUTS panel displays.
2. Refer to Diagnostics—Digital Output Options below for descriptions of diagnostic options.
NOTE: Depending on the type of thermal management unit, included components, and control settings of your
system, all of the options listed may not be available on your iCOM display.
11.7.1 Diagnostics—Digital Output Options
Alarm Relay
Enables/disables alarms during manual/diagnostic mode.
Q15 Output State
Enables/disables Q15 output during manual/diagnostic mode.
11.8 Diagnosing Analog Output Issues
1. Touch , then > Diagnostic/Service > Diagnostics > Analog Outputs in the Category list. The
ANALOG OUTPUTS panel displays.
2. Refer to Diagnostics—Analog Output Options below, for descriptions of diagnostic options.
NOTE: Depending on the type of thermal management unit, included components, and control settings of your
system, all of the options listed may not be available on your iCOM display.
11.8.1 Diagnostics—Analog Output Options
Analog Output N
Controls analog outputs during manual/diagnostic mode. (where N is the analog output number)
11.9 Diagnosing Customer Input Issues
1. Touch , then > Diagnostic/Service > Diagnostics > Customer Inputs in the Category list. The
CUSTOMER INPUTS panel displays.
2. Refer to Diagnostics—Customer Input Options below, for descriptions of diagnostic options.
NOTE: Depending on the type of thermal management unit, included components, and control settings of your
system, all of the options listed may not be available on your iCOM display.
11.9.1 Diagnostics—Customer Input Options
Input N
Status and description of customer-input sensors (where N is the input number).
11 Performing Diagnostics
101