Vertiv Liebert iCOM DP400/500, Инструкция по установке и эксплуатации

Страница: 101 / 180

10.4.1 Control Board Back Up and Restore Options
Action Type
Selects the back up or restore function. Options are:
• Back Up: Saves a copy of the settings in a file named with the IP address of the iCOM control board. Use a back
up file to restore the unit settings in the event of a failure.
• Replicate: Loads only the configsafe files (general settings/setpoints) from a back up file from another system.
• Restore: Loads a back up configuration from a previously-saved back-up file. For example, when a control
board fails and must be replaced, you can load the configuration from a back up of the failed board.
Location
Indicates the port to which the USB drive is connected.
Site
Indicates the folder you created on the USB drive to which the back-up system file is saved.
System
The back up file named with the IP address of the control board from which it was saved.
10.5 Managing Access Permission and Passwords
NOTICE
Risk of loss of access to iCOM. Can cause operational problems.
When a password is changed, make sure you record the new password and inform authorized users. If problems
arise, passwords can be reset by Vertiv™ Technical Support, visit https://www.vertiv.com/en-us/support/.
Two four-digit passwords provide two levels of permission to access iCOM menus and are set with factory-default values.
You can change the value of each password so that only those provided with the current password may access the menus
that it unlocks.
The factory default password for user and service login are:
• Default User password: 1490
• Default Service password: 5010
NOTE: To change the password, you must use the Service password currently-assigned to unlock the Service menu.
1. Touch , then > Backup & Security > Manage Permissions .
The MANAGE PINS panel opens.
2. Touch the role to change, then touch the Value field for the password to change. The keypad opens.
3. Type a new four-digit/character password, then touch , and touch Save . The password is saved.
• Touch Cancel to discard the change.
10 Administering Firmware, Settings and Security
93