Vericom VC4000, Руководство пользователя

Страница: 84 / 108

VC4000 Manual 80
VC
4000
Setu
p
VC4000 is set at a common pitch and roll factor (factor 1) for all
vehicles with useful suspension systems.
The VC4
000 is shipped with “Pitch factor” and “Roll factor” of 1,
which is an adjustment of 0.9700 for X and Y axis and a factor of 0
which is an adjustment of 1.000 for the Z axis.
The pitch of the vehicle can be measured using the VC4000’s rate
gyro. See Pitch/Roll Factors on page 67 for details.
To set the G Adjust:
1. Select
Accelerometer…
from the Setup menu
2. Select G Adjust
3. Type in a number from 0.500 to 1.000 for each axis.
4. Press
ENTER / YES .
Default adjustment is 0.9700.
Graph Range
Set the maximum range of the VC4000 acceleration bar graphs and
friction circle graph when monitoring acceleration.
To set the Graph Range:
1. Select
Accelerometer…
from the setup menu
2. Select Graph Range
3. Type in a number from 0.1 to 6.0.
4. Press
ENTER / YES .
Default graph range is 1.0.
Alarm Threshold
There are 3 acceleration alarms that can be set so the VC4000
beeps when the acceleration threshold is exceeded; Accelerating,
Braking and cornering. The alarm is turned off when it is set to 0.0.
To set the Alarm Threshold:
1. Select
Accelerometer…
from the Setup menu
2. Select Alarm Threshold
3. Type in a number from 0.000 to 6.000.
4. Press
ENTER / YES .
Default alarm threshold is turned off, 0.0.