Vericom VC4000, Руководство пользователя

Страница: 28 / 108

A
cc
id
en
t
R
eco
n
U
se
VC4000 Manual 24
second before impact (4xG-Threshold) and up to 30 seconds after
impact. See Tools/Crash Mode on page 51 for more information.
1. Drive to the area where you want to take a measurement, or
close, where the slope is the same.
2. To power on, press the
POWE R
key and hold for 1 second
until the unit beeps.
3.
From the “READY” screen press the Tools key, then select
Crash Mode with the vehicle at a complete stop. The
VC4000 will zero adjust the accelerometers, show the
available record time in seconds, display the run number
being saved, and then display:
4. Accelerate the car to the desired initial speed. After
reaching that speed, trigger the VC4000 using the external
trigger or it will activate when it impacts an object and
generates 4xG-Threshold or more.
Using Monitor
1. Drive to the area where you want to take a measurement, or
close, where the slope is the same.
2. To power on, press the
POWE R
key and hold for 1 second
until the unit beeps.
3.
From the “READY” screen press the Tools key, then select
Monitor , then G-Force .
4. The display will show:
5. With the vehicle at a complete stop press
ENTER / YES .
The VC4000PC will zero adjust the accelerometers, show
the available record time in seconds, display the run number
being saved, and then display accelerometer data.
6. Perform your test. Press
CLEAR / NO to stop saving data.
AUTO START READY
SAVE IN FILE
MEMORY?
DEPRESS YES or NO