Vericom VC4000 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 108

Vericom VC4000 Скачать руководство пользователя страница 33

VC4000 Manual

29

Information available after an acceleration test (using User Type
Accident Reconst.)

After an acceleration run, bring the vehicle to a complete stop. The
ending Time, Speed, Distance and Average Gx will be displayed.

Press the Graph/Data key to display graphs of the run. Press
Speed, Distance, G-Force, RPM or Sensor. Press the same key
again to scroll through multiple graphs, such as pressing the G-Force
key to scroll through longitudinal, lateral or vertical G-Force.

The Acceleration Mode operating limits are:

Imperial

Metric

Maximum time

99.9 seconds

99.9 seconds

Maximum speed

255 MPH

511 KPH

Maximum distance

9000 feet

1800 meters

Maximum acceleration

+2G

+2G

The  VC4000  can  be  used  to  measure  an  acceleration  test  then  a
brake  test  from  one  run.    This  is  useful  for  measuring  the
acceleration  to  a  point  then  getting  a  drag  factor  without  having  to
come to a stop and re-zero.

1. Drive to the area where you want to take a measurement,

where the slope is the consistent.

2. To power on, press the

POWE R

key and hold for 1 second

until the unit beeps.

Speed Accel Run

0-60 MPH 5.50 sec

221 ft

Avg Gx= 0.34

Accel Display (12)

Accel/Brake Run

«
...
31
32
33
34
35
...
»

Содержание VC4000













































































































Отзывы:

Нет отзывов