Vericom VC4000, Руководство пользователя

Страница: 54 / 108

T
o
o
ls
VC4000 Manual 50
Note that when tilting the VC4000 and using gravity the vector sum
will not equal 1.000 G when tilted 90°. This is because the Z axis
accelerometer is also zeroed when the X axis accelerometer is
zeroed.
(PC) Monitor OBDII
A vehicles OBDII available sensors can be monitored and checked
to make sure the VC4000 has a connection to the vehicle. The
optional VSI must be used. Any of the 14 available sensors that are
turned on will show here. If saving the data, all OBDII sensors listed
will be saved.
(PC) Monitor GPS
With the optional 5Hz GPS antenna , GPS speed, Latitude,
Longitude and Altitude can be monitored, along with the number of
satellites in range and other GPS diagnostic information. Plug the
GPS sensor into RS232 port one. If saving data and GPS is turned
on, GPS speed will be recorded every sample period and Latitude
and Longitude will be saved at the beginning and end of the run. If
GPS location and altitude are turned on, tracking information will be
recorded every 5Hz, which can be tracked on a map within Profile 5.
Protocol Type
SAE J1850
Response Time = 10
OBD Timeouts = 0
Vehicle Speed = 33
Engine RPM = 2045
Monitor OBDII
Speed = 0.000
Lat = 45 12.84734 N
Long = 93 32.97201 W
Valid = 2
#Sat = 06
Hdop = 6.800
Alt = 282.600
Monitor GPS