UTC Fire and Security M3000, Руководство по установке

Страница: 79 / 174

Chapter 5
Reader processing boards
69
Figure 17.2SRP supervised reader connector points
1. Supervised Exit DI and supervised Door DI point must use end-of-line resistors and must be terminated at the appropriate Return
point (not to ground).
Table 18. 2SRP connector pinouts
J2/J4 reader connector pinouts
PIN Signal name
1 +5 VDC/+12 VDC
2 Ground
3 Display DO
4 Door DO (Reader LED)
5 Supervised Exit DI (Exit Request)
1
6 Reader Data 0
7 Reader Data 1
8 Supervised Door DI (Alarm Point)
1
9 Supervised Door DI Return
1
10 Supervised Exit DI Return
1
J3/J5 relay connector pinouts
PIN Relay
1 Door Strike Relay – Normally Closed (NC)
2 Door Strike Relay – Common (Com)
3 Door Strike Relay – Normally Open (NO)
4 Auxiliary Output Relay – Common (Com)
5 Auxiliary Output Relay – Normally Closed (NC)
6 Auxiliary Output Relay – Normally Open (NO)
7 Alarm Shunt Relay – Common (Com)
8 Alarm Shunt Relay – Normally Closed (NC)
9 Alarm Shunt Relay – Normally Open (NO)