UTC Fire and Security M3000, Руководство по установке

Страница: 123 / 174

Chapter 8
Controller firmware tools
113
6. In the Total Bit Length field, select the number of bits required to encode and decode badge data.
7. In the Facility Characters field, enter the number of characters required for the facility data.
8. In the Badge Characters field, enter the number of characters required for the badge data.
9. Click each button to select the role of that bit in the badge data, using any of the following
Wiegand-format options:
• B - badge
• F - facility
• 1 or 0 - fixed data
• P - parity
• - undefined (blank)
Figure 47. Controller Parameters/Badge Formats - Sample Create Wiegand format form
10. If you wish to select a parity mask:
a. Use the drop-down box labeled Select one of four Parity Masks to select a parity mask.
b. Select either the Even or the Odd radio button.
c. Click on the bits that you wish to check the parity.