UTC Fire and Security M3000, Руководство по установке

Страница: 158 / 174

M5 controller
Installation Manual
148
• For UL listed installations:
•
Operating environment: 32°F to 120°F (0°C to 49°C)
• Humidity: 85%
• M3000 - Output Ratings: 2RP, 2SRP, 8RP reader boards - card reader outputs must be rated a
minimum 11 to 12 VDC at 150 mA per output.
• M3000 - Input Ratings: 120 VAC, 50/60 Hz, 0.9 A and 240 VAC, 50/60 Hz, 0.5 A
• M3000 must be used with the ESD model SPS-6.5 power supply or the Power One model
LWR1141-6EM3 power supply.
• The electrical rating of the battery is 12 VDC, 12 AH, sealed-lead acid battery.
• Grounding must be in accordance with Article 250 of the National Electrical Code.
• The M3000 controller must only be used with the following compatible card readers: Models 100, 940,
941, 970, 971, 972, 973, 820, 825, 840, 845, 430/435, 1000/1010, and 1100/1081.
• The exit request input circuit and initiating device must be contained within the secured area. The exit
device circuit must be connected to listed switches or exit devices.
• The M3000 must be mounted inside the secured area.
• The door strike power must be provided from a listed burglar alarm system power supply. If the door
strike circuit is arranged as fail secure (door remains locked upon loss of power), listed emergency
panic hardware must be provided to allow exit from the secured area. A fail-safe configuration results
in the door strike circuit unlocking in case of a power loss.
• The number of separate signals on a single channel shall be limited to 1000.
• Alarms on Picture Perfect and Secure Perfect should be set using the following priority list with 1
being the highest priority and 7 being the lowest:
1. Fire alarm and industrial supervision
2. Hold-up or panic alarm
3. Burglar alarm
4. Watchman or guard tour
5. Fire-alarm supervision
6. Burglar-alarm supervision
7. Industrial supervision
• A clearly marked redundant system with the same configuration as the primary machine should be
available as a backup.
• In order for this product to be UL compliant, the firmware level must be R1.05 or later.
Note: 1. Removing all alarms from the Alarm Monitor should not be available to operators on UL listed systems.
2. Encryption is NOT investigated by UL.
WEEE
European directives
The European directive “Waste Electrical and Electronic Equipment” (WEEE) aims to minimize the impact of electrical and electronic
equipment waste on the environment and human health. For proper treatment, recovery and recycling, you can return the equipment
marked with this symbol to your local supplier upon the purchase of equivalent new equipment, or dispose of it in designated
collection points. Further information can be found on the following website:
www.recyclethis.info
European representative for manufacture: UTC Fire & Security B.V., Kelvinstraat 7, 6003 DH Weert, The Netherlands.