TriPoint VertexRSI 7200, Руководство по эксплуатации и обслуживанию

Страница: 231 / 266

Append i x F-7200 GPIB (IEEE-488) Request/Command M & C Protoco l C G6041(Rev. E-June 00)
F - 1 9
C213 Funct i on: No funct i on.
Th i s or i g i na ll y w as used to change the pos i t i on l oop
ve l oc i ty to l erance, but i s no w supported for back w ard
compat i b ili ty purposes on l y.
Response: < none >
Secur i ty: Superv i sor ( l eve l 3)
C220 v Funct i on: Set encoder-count i ng d i rect i on.
v = vector
Set encoder-count
i ng d i rect i on. For each ax i s,
Y = reversed, N = norma l .
Response: < none >
Examp l e: C 2 2 0 Y N Y, A Z and POL are reversed. EL i s not.
Secur i ty: Superv i sor ( l eve l 3)
R 220 Funct i on: Request encoder count i ng d i rect i on.
Response: < vector >
Examp l e: R2 2 0
Y N Y (sho w s A Z, EL, POL)
0 0 0 >
Secur i ty: Mon i tor ( l eve l 1)
C221 v Funct i on: Set encoder offsets d i rect l y.
v = pos i t i on vector
Set offsets d i rect l y by supp l y i ng offset va l ues.
Response: < none >
Secur i ty: Superv i sor ( l eve l 3)
R 221 Funct i on: Request encoder offsets.
Response: < pos i t i on vector >
Secur i ty: Mon i tor ( l eve l 1)
C222 v Funct i on: Set encoder offsets i nd i rect l y.
v = pos i t i on vector
Set offsets i nd i rect l y by supp l y i ng l ook ang l es.
Response: < none >
Note: There i s no match i ng request for C 2 2 2, use R2 2 1.
Secur i ty: Superv i sor ( l eve l 3)
C223 c Funct i on: Set POL enab l ed f l ag.
c = " Y " to enab l e, " N " to d i sab l e.
Response: < none >
Secur i ty: Superv i sor ( l eve l 3)
R 223 Funct i on: Request POL enab l ed f l ag.
Response: c, w here c = " Y " i f POL f l ag i s enab l ed, c = " N " i f POL
f l ag i s d i sab l ed.
Secur i ty: Mon i tor ( l eve l 1)