TriPoint VertexRSI 7200, Руководство по эксплуатации и обслуживанию

Страница: 171 / 266

A ppend i x C - 7 2 0 0 Remote Mon i tor and Contro l Protoco l C G-6 0 4 2 (Rev. F, June 2 0 0 0)
C - 7
5.0 X0nn - GENE R A L R EQUESTS AND COMMANDS
Note that for a ll requests, the secur i ty l eve l i s Mon i tor ( l eve l 1), un l ess otherw i se
spec i f i ed.
A ll str i ngs must be enc l osed i n quotat i on marks ( " ).
C0 Funct i on: No operat i on. Th i s command may be used to test w hether
the remote port i s commun i cat i ng correct l y w i th the 7 2 0 0
A C U.
Response: < none >
Secur i ty: Operator ( l eve l 2)
R 0 Funct i on: No operat i on.
Th i s command may be used to test w hether the remote
port i s commun i cat i ng w i th the 7 2 0 0 A C U.
Response: < none >
Secur i ty: Mon i tor ( l eve l 1)
C1 n Funct i on: Stop/resume track i ng.
n = 0: Stop antenna. Does not return to St a ndby . Th i s i s
equ i va l ent to press i ng the ST OP key on the 7 2 0 0
A C U front pane l .
n = 1: Resume track i ng. Th i s i s equ i va l ent to press i ng the
RESU ME key on the 7 2 0 0 A C U front pane l .
n = 2: Stop track i ng and return to St a ndby mode. Th i s
has no effect on the ST OP/RESU ME funct i on.
Response: < none >
Secur i ty: Operator ( l eve l 2)
R 1 n Funct i on: Request pos i t i on l oop i nformat i on.
n = 0: Request current antenna pos i t i on vector.
n = 1: Request current command pos i t i on vector.
R1 0 Response: v
w here v = pos i t i on vector (az i muth e l evat i on po l ar i zat i on)
R1 1 Response:
0 ( i f i n Standby) or 1 v ( i f track i ng)
v i s a pos i t i on vector as descr i bed above.
Secur i ty: Mon i tor ( l eve l 1)