92
* Note that if the internal PLC (low speed operation PLCL) function usage selection is "on (use, i-00=on)", [VFC66-Z]
(MO1
、
MO2) and [optional board] (MO3 to MO6) become output terminals from the internal PLC (low speed operation
PLCL) function. Also, output for each function of the multifunction output function below can be used as input to the
internal PLC (low speed operation PLCL) function.
Speed detection (1) (H-06) to maximum speed/voltage reducing rate (H-12):
Items related to the multifunction output terminal. For details, refer to "Multifunction output terminal function
description list" described later.
Multifunction Output Terminal (1) Connection
P
MO1
MO2
COM
VFC66-Z
ＴＢ１
Power supply
(+24 V Max)
PLC input unit
1. Connection with PLC (source mode)
P
MO1
MO2
COM
VFC66-Z
ＴＢ１
Power supply
(+24 V Max)
PLC input unit
2. Connection with PLC (sync mode)
P
MO1
MO2
COM
VFC66-Z
ＴＢ１
Power supply
(+24 V Max)
R
R
+
+
3. Connection with relay
Warning
[Safety notice]
Be sure to turn off the VF66B (DC motor drive) before connecting terminals.
Otherwise, it can result in a risk of electric shock.
Close the front cover before turning on the power.
Otherwise, it can result in a risk of electric shock.
