103
Machanical loss compensation
Console
panel
monitor
display
Contents
Setting range (selecting item)
Setting
resolution
Initialized
data
Unit
i-22 to
i-32
[For special adjustment]
*1
-
- -
-
*1: Provided for special adjustment. Do not change the parameter data from default setting (leave it as factory initialized
data).
Armature Voltage Command Setting
Console
panel
monitor
display
Contents
Setting range (selecting item)
Setting
resolution
Initialized
data
Unit
i-33
Armature voltage command value
(for armature voltage control)
- Rated motor armature voltage (A-03)
to Rated motor armature voltage (A-03)
1 0
V
i-34
Forward JOG armature voltage
command
(for armature voltage control)
0 to 100
1
0
%
i-35
Reverse JOG armature voltage
command
(for armature voltage control)
0 to 100
1
0
%
Armature voltage command value (for armature voltage control) (i-33):
Setting used to specify an armature voltage command value on the console panel for armature voltage control.
It is enabled when selecting the console panel as a command input when coupled (b-09) and specifying
interlock for speed/armature voltage command input selection (b-10), and when selecting the console panel
as a speed commanding place in speed/armature voltage command input selection (b-10). Refer to "6.3. Area
b" in Chapter 6 and "7.3. Area b" in Chapter 7.
Positive JOG armature voltage command value (for armature voltage control) (i-34)/Negative JOG armature
voltage command value (for armature voltage control) (i-35)
Sets positive JOG armature voltage command and negative JOG armature voltage command values for
armature voltage control.
Torque for machanical loss (%)
Revolving speed
-A-00
0
Motor speed (r/min)
Motor speed
ON
0
OFF
To over torque
protection
function, droop
control function
Torque command
after machine loss
compensation
Torque command
+
A-00
i-20
i-21
i
-
19
